Windows NT 4.x Network
Windows NT 4.x Network
Introduction
Preliminary Steps
Your printer can be installed on a Windows NT network using one of three methods:
•TCP/IP protocol
•DLC/LLC protocol
•AppleTalk protocol
The Preliminary Steps given below must be accomplished for all printers regardless of the protocol that is being used. Then, the Quick Install Steps will detail the installation based on the protocol used on your network.
The CentreWare DP program on your Printer Management Software
1 Print the Configuration Sheet. Details are in this document in Appendix A: Print The Configuration Sheet. Retain this page for reference.
2 Check the Configuration Sheet and verify that both the desired protocol and connector are enabled.
3 Proceed to the Quick Install Steps for your network protocol.
