Appendix B: Set an IP Address
Dynamic Addressing (RARP/BOOTP)
The TCP/IP address is assigned automatically by the
Server. Follow the steps below:
1
2
3
Press Menu Up or Menu Down until you see:
Me nus
Ethernet Menu
Press Item Up or Item Down until you see:
Ethernet Menu
IP Address Res.
Press Value Up or Value Down until you see:
IP Address Res.
BOOTP/RARP
4 Press Enter.
5 Update the RARP/BOOTP server's /etc/ethers or /etc/bootptab and the /etc/hosts files with a host name, TCP/IP and Network addresses. Consult your UNIX documentation for more RARP/BOOTP server configuration details.
6 Power Off the Printer.
7 Power the printer ON and allow time for an IP address to be assigned by the RARP/BOOTP server (this time may vary depending on network traffic).
8
9
Perform the steps contained in the section of this document entitled Appendix A: Print The Configuration Sheet.
Obtain the TCP/IP address from the Configuration Sheet.
