Xerox 3 manual X.x name, Arp -s ether name 0081aaa no leading zeros RS-6000

Appendix B: Set an IP Address

UNIX

1	Use a text editor to open the /etc/hosts file.
2	Add the following line:
	x.x.x.x name
	where x.x.x.x is the IP address you are assigning to the
	CentreDirect External Print Server (External Ethernet
	Adapter) and name is the host name.
3	Save the /etc/hosts file.
4	Create a static ARP entry by typing the following
	command:

arp –s ether name 0:0:81:a:a:a (no leading zeros: RS-6000)

arp –s name 0:0:81:a:a:a (no leading zeros: most UNIX systems)

arpbypass set name 0x00.0x00.0x81.0xa.0xa.0xa (AT&T and NCR)

where a:a:a is the last three number pairs for the CentreDirect External Print Server (External Ethernet Adapter) address.

The assigned IP address must be on the same subnet as the UNIX workstation.

5	Open a telnet session by typing telnet name.
6	When the telnet window appears, enter ! and then yes to
	enter monitor mode.
7	Type I to enter the IP address. Enter the desired IP address.
8	Reboot the CentreDirect External Print Server (External
	Ethernet Adapter) by typing R.

Quick Network Install Guide ❖ 53