Xerox 96, 4635, 180 manual Stacker bin performance guide, Performance limits

PAPER PERFORMANCE GUIDELINES

		Table B-5.		Stacker bin performance guide
					Performance limits and
Paper	Superior performance		Good performance		suggested alternatives
Size range1	8 by 10 to 11.69 by 17 inches/203				Smaller or larger sizes cannot be
	by 254 to 297 by 432 mm				used.
Weight range	20 to 110 pounds/80 to 200 gsm		Lighter than 20 pounds/80		Weights outside the limits shown
			gsm and no lighter than 16		here are not recommended.
			pounds/60 gsm
Capacity					•	Capacity automatically
						limited so stack weight will
						not exceed 30 lbs/13.g kg
					• Selectable with bin capacity
						programming (Refer to the
						“Bin full criteria and setting
						bin limits” section of the
						“Status and print tasks”
						chapter for instructions.
Stack quality	•	Xerographic paper in	•	Lighter weight stocks	•	Adjust process decurler
		good condition		with low output curl	• Flip paper in paper feeders
	• 20 pound/80 gsm and heavier		•	Intermixed stocks
					• Limit stack capacity to
		stock
						acceptable limits.
	• Very low to no output curl
Type or	•	Xerographic paper in	•	Labels, preprinted	• High output curl stocks can
condition		good condition		forms, perforated		cause severe stack quality
	•	Predrilled stock		stocks		problems
			•	Intermixed weights	• Tab stock intermixed with
	• No cut-outs, perforated or
						smaller stocks results in
		intermixed weights
						degraded stack quality
					• Reinforced mylar should be
						limited to small stacks of
						200 sheets or less or sent
						to the sample tray

1. Optional 7 X 10 enablement kit allows 7 by 10 inches/178 by 254 mm paper size.

B-6 XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE