Xerox 96, 4635, 180 manual Table B-4. Paper stocks guide

	PAPER PERFORMANCE GUIDELINES
	Table B-4. Paper stocks guide (continued)
Stock type	Instructions for use
Tab stock	• Load into trays 1 and 2 with tabs to the LEFT.
	• For best performance, print should be centered on the tab and should not
	extend to either edge.
	• Use tab stock in perfectly flat condition. DO NOT use deformed, bent, or
	damaged tabs.
9-inch cover stock	Load into any tray.
110 pound/200 gsm
High-speed label stock	• Load FACE UP.
	• DO NOT run two-sided (duplex) prints.
Letterhead	• Load into trays with side 1 UP and top edge toward the front of the tray
	(avoid placing the print in line with the feed belt in trays 1 and 2).
	• Avoid using freshly preprinted paper.
Manual two-sided (duplex)	• Load into trays with printed side DOWN and top edge toward the front of the
prints	tray (avoid placing the print in line with the feed belt in trays 1 and 2).
	• Print the second side as soon as possible after the first side to prevent
	wrinkling and excessive curl.
Textured paper	Heavily textured paper may yield prints with ragged character appearance and/
	or deletions. To test, print a sample sheet.

1.You can order a mylar reinforcement tray which allows a feeder tray to handle up to 500 sheets of this type of stock. Contact your service representative for additional information.

XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE B-5