PRINTERS

9Sample button

10Brightness control thumbwheel

11Icon area

12Message area

1.Language icon

If two languages are available for your printer control console, selecting this icon allows you to choose the language for the printer control console messages.

2.Printer icon

Select this icon to display the printer mimic. (This is the default display on the printer control console.)

3.Fault List icon

Select this icon to display the Fault List screen. All active faults will be listed in order of occurrence.

4.Tools icon

Select this icon to display call for service information and to adjust display features of the printer control console (for example, alarm loudness).

5.Guarded Tools icon

This icon is reserved for the service representative and operators who have completed Advanced Customer Training (ACT/eXcellerate).

6.Clear button

Select this button to clear fault messages.

7.Continue button

Press this button to resume printing.

8.Stop button

Press this button to stop printing.

9.Sample button

The Sample button on the 180, 4635, or 96 printer will duplicate one of the sheets in the paper path and deliver it to the sample tray. This sheet can be used to check quality and alignment while printing. The button is disabled for MICR models.

10.Brightness control thumbwheel

Use this thumbwheel to adjust the brightness of the printer control console display.

11.Icons

Area where the following icons appear:

Fault icon. This icon appears when a fault exists in the system that stops the printer or prevents it from printing.

Hint icon. This icon appears when a masked fault or condition exists in the printer. See “Fault masking and the printer control console” in the Guide to Troubleshooting.

ACT/eXcellerate icon. This icon appears when a maintenance task requiring an ACT/eXcellerate trained operator must be done. If you have successfully completed ACT/eXcellerate,

XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE

3-5

Page 27
Image 27
Xerox 96, 4635, 180 manual Printers