Xerox 180, 4635 Client workstations and system software, Supported hardware and operating systems

SYSTEM OVERVIEW

Client workstations and system software

To send print jobs to DocuPrint NPS, the customer needs to provide the proper client hardware, operating system, and network software.

Supported hardware and operating systems

Xerox DocuPrint supports the following types of networked client workstations and operating systems:

•

•

Sun Workstation running Sun operating system

PC running MS-DOS 6.2 and Microsoft Windows 3.1, configured for the network environment

•

•

•

•

•

•

•

•

PC running Windows 95/98, configured for the network environment

PC running Microsoft Windows NT, configured for the network environment

PC 386 or 486, running MS-DOS, version 6.2, with one of the following TCP/IP packages:

—PathWay Access 3.1, Wollongong Integrated Networking/ Transmission Control Protocol (WIN/TCP) for DOS, release 6.0

—FTP software, PC-TCP, release 3.0 or higher

—Sun Personal Computer–Network File Services (PC-NFS), version 5.1

IBM RS/6000 running IBM AIX, version 4.1

HP/Apollo running HP-UX, version 10.01

DECStation 5000/200 running DEC Ultrix, version 4.3

Apple Macintosh, System 7, 7.5, or 8.x, using AppleTalk through EtherTalk, phase 1 or 2

Any system that supports RFC-1179 lpr/lpd.

DocuPrint software may be compatible with workstation models and software versions other than those listed above.

Client software

On your PC or workstation, you must install or set up a supported means of submitting jobs to DocuPrint NPS. Depending on your system, you can use the following:

•

•

Xerox drivers for Windows 3.x, 95/98, or NT

Xerox Document Submission software for DOS, Windows 3.x, 95/98, NT, or Macintosh

•

•

•

Third-party drivers; some PostScript drivers can be used in conjunction with Xerox-supplied PPD files

Third-party TCP/IP lpd utility

Apple/Macintosh Printer Access Protocol (PAP)

1-4 XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE