PAPER PERFORMANCE GUIDELINES
|
| Table | Trays 3, 4, 5 and 6 (or high capacity trays) | |||
|
|
|
| performance guide |
|
|
|
|
|
|
|
| |
|
|
|
|
| Performance limits and | |
Paper | Superior performance | Good performance | suggested alternatives | |||
|
|
|
|
| ||
Size range1 | 8 by 10 to 11.69 by 17 inches/ |
|
| Smaller or larger sizes cannot | ||
| 203 by 254 to 297 by 432 mm. |
|
| be used. | ||
| Includes: |
|
|
|
| |
| • | 11 by 14 inches |
|
|
|
|
| • | 11 by 17 inches |
|
|
|
|
| • B4 (250 by 353 mm) |
|
|
|
| |
| • A3 (297 by 420 mm) |
|
|
|
| |
|
|
|
| |||
Weight range | 20 to 110 pounds/80 to 200 | 16 to 20 pounds/60 to 80 gsm2 | Weights outside the limits | |||
| gsm |
|
|
| shown are not recommended. | |
|
|
|
|
| ||
Capacity | Tray 3: 2600 sheets, 20 pound/ |
|
| For greater capacity, use the | ||
| 80 gsm paper |
|
| Autoswitch feature. | ||
| Tray 4: 2600 sheets, 20 pound/ |
|
|
|
| |
| 80 gsm paper |
|
|
|
| |
|
|
|
|
|
|
|
Type or condition | • | Xerographic paper in | • | Slightly curled paper3 | • | Excessively curled |
|
| good condition | • Manual |
| paper4 | |
| • | Predrilled stock (fanned | • | Curl direction should be | ||
|
| (duplex) prints | ||||
|
| thoroughly) | • High speed label stock |
| determined before | |
|
|
|
| loading paper into tray.5 | ||
|
|
|
|
| • DO NOT use mylar | |
|
|
|
|
|
| reinforced paper in trays |
|
|
|
|
|
| 3, 4, 5 or 6. Hardware |
|
|
|
|
|
| damage may result. Use |
|
|
|
|
|
| trays 1 or 2. |
|
|
|
|
|
|
|
1.Optional 7 X 10 enablement kit allows 7 by 10 inches/178 by 254 mm paper size.
2.Make sure that heavy weight paper levers (located in areas 2 and 4 of the printer) are in the appropriate position for the weight of paper being used.
3.Curl direction should be determined before loading paper into trays. For additional information, refer to the “Clearing paper misfeeds and jams” chapter in your Troubleshooting Guide.
4.Curl direction should be determined before loading paper into trays. For additional information, refer to the “Clearing paper misfeeds and jams” chapter in your Troubleshooting Guide.
5.Curl direction should be determined before loading paper into trays. For additional information, refer to the “Clearing paper misfeeds and jams” chapter in your Troubleshooting Guide.
XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE |
