6.Insert XPrint PostScript Print Tool installation diskette #1 into the floppy drive of your system.
7.To run XPrint installation script.:
Solaris 1.X USERS:
From a command line, TYPE: cd /tmp [ENTER]
bar xvfp /dev/rfd0 [ENTER] XeroxInstall/setup [ENTER]
Solaris 2.X USERS:
From a command line, TYPE: volcheck [ENTER]
cd /tmp [ENTER]
cp /floppy/floppy0/setup . [ENTER]
./setup [ENTER]
8.Follow setup instructions to install the XPrint PostScript Print Tool.
9.When installation is complete, setup will automatically launch theSetup49XX configuration tool.
10.Review the Installation Overviews for Solaris and NON Solaris UNIX systems in Chapter 4 to decide how you wish your XPrint printer connected. The possible configurations are:
Direct Connect (parallel port) Network (Remote network printer) Network (Remote network Spooler)
Network (Configuring a Remote print Spooler)
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION |
