Xerox 701P91273 manual Press Enter while <IP ADDRESS> is displayed

Appendix B Setting the IP address with the Control Panel

1.Press On Line button on the Control Panel. Be sure the light next to it is OFF

2.Press Menu . The ON-LINEmessage disappears and TOP MENU is displayed.

3.Press Up+ until <COMMUNICATIONS> appears on the Display Panel and then press Enter.

4.Press Up+ until <NETWORK SETUP> is displayed and then pressEnter.

5.Press Up+ until <TCP/IP> is displayed and then pressEnter.

6.Press Enter while <IP ADDRESS> is displayed.

7.Press Enter while <DYNAMIC> is displayed.

8.Press Up+ until <NO> is displayed and then pressEnter.

9.Press Enter while <SET IP ADDRESS> is displayed.

10.Press Up+ to increase the digit value. PressDown- to decrease the digit value. When each digit is correct, pressNext button to move on to the next digit.

11.The Next button wraps around the display without setting the value if an error is made. After the complete IPaddress is displayed correctly, pressEnter. The IP address is now set

12.Reset Printer to have new settings take effect.

15-2 XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION