To Use Telnet:
At any Telnet client (UNIX, WFW3.11, NT, DOS, ...) Telnet to port2002 of the 49XX.
NOTE: Telnet will work only if the TCP/IP protocol stack is loaded AND it supports Telnet.
NOTE: In the following examples, the expressionXXX.XXX.XXX.XXX refers to the IP address of your XPrint printer. SeeAppendix A to obtain PRINT SETTINGS page for review of your printer’s IP address. If necessary, seeAppendix B to set your printer’s IP address.
Starting TELNET from UNIX:
At the Command prompt TYPE:telnet XXX.XXX.XXX.XXX 2002 [ENTER]
Starting TELNET from WINDOWS NT:
At the Command prompt TYPE:telnet XXX.XXX.XXX.XXX 2002 [ENTER]
Starting TELNET from WFW3.11 (with Microsoft’s win32s TCPIP stack):
At the Command prompt TYPE:telnet XXX.XXX.XXX.XXX 2002 [ENTER]
The Telnet Console Main Menu:
At the Command prompt TYPE:telnet XXX.XXX.XXX.XXX 2002 [ENTER]
The system will attempt to connect to the host.You will see:
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION |
