Xerox DocuPrint C6 manual Selecting labels, Selecting transparencies, Selecting banner paper

Selecting labels

Use only paper face label stock. Ink will not dry on vinyl, plastic, or clear label stock. Individual labels will not feed properly. Letter or A4 sheet size for the labels is required at a minimum. For best results, use labels designed for an ink jet printer. The maximum quantity the tray can accommodate is 50 sheets.

Do not use any label material that is partially used, folded, curled, or wrinkled.

Selecting transparencies

Use transparencies designed for ink jet printers only. Do not use paper-backed transparencies. Refer to the instructions for the transparency to see which side is the printable side.

Selecting banner paper

Use any banner paper designed for ink jet printers. Do not use track-fed paper or paper in rolls. The C6 printer can accommodate single 8.5 x 55 in. or 210 mm. x 1485 mm. sheets.

Selecting envelopes

Most short flap envelopes work well in the printer, although some variables in paper composition may affect print quality. Fully test an envelope before purchasing large quantities.

68