Packing the printer for return to a Service Center
Should you need to return the printer for servicing, follow the packing instructions in this section or follow the process as instructed by the Xerox Customer Support Center.
Note: Do not ship the power cord, printer cable, printer driver disks, user guide, or print head and ink cartridges unless instructed to do so.
1.Remove the print cartridge.
2.Close the printer cover and remove the paper output shelf and the paper input shelf.
3.Disconnect the power cord and the printer cable.
4.If you have the original box, use the original packing material and go to step 10. If you do not have the original box, continue with step 5.
5.Completely wrap the printer in two layers of bubble wrap (minimum thickness of 12.3 mm or 5”) and tape the bubble wrap to keep it in place.
6.Select a corrugated box large enough to allow at least 50.8 mm (2”) between the
7.Fill the bottom of the box with 75 to 100 mm (2” to 3”) of loose fill.
8.Place the
62
