Xerox DP 1015 manual Removing and Replacing the Video Adapter

The Xerox DP1015 Projector

Removing and Replacing the Video Adapter

Remove the video adapter if you want to project non-video data— such as spreadsheets or text documents—from your computer.

1.Make sure the projector’s power is turned off.

2.Unscrew the two thumbscrews.

Thumbscrews

3.Carefully pull the video adapter straight out and away from the projector body.

The video adapter plugs into the M1DA port on the back of the projector body. Be careful not to bend the pins of the M1DA connector on the back of the video adapter as you pull it free.

The M1DA port is now exposed so you can connect your computer.

M1DA Port

4.See “Connecting the Projector for a Data-Only Display” on page 8 for the connections to the M1DA port.

5.To replace the video adapter, align the pins of the M1DA connector on its inside with the M1DA port and then push the video adapter onto the projector body. Tighten the thumbscrews.

NOTE: If the video adapter is not connected properly, or is loose, the projector will not project an image.

Xerox DP1015 User’s Guide 7