Connecting the Projector
Connecting the Projector
Connecting the Projector for a Data-Only Display
In this configuration, the projector displays data (such as spreadsheets or text files) from your computer. Video and audio are not available.
USB and VGA connectors |
Power Cord |
M1DA/VGA and USB cable |
Video Adapter (Removed) |
M1DA Connector |
1.Make sure the projector and computer are turned off.
2.Remove the video adapter from the back of the projector.
3.Using the M1DA/VGA and USB cable, connect the M1DA connector to the projector’s M1DA port. Connect the VGA connector to the VGA port on the computer.
4.Connect the USB connector to the USB port on your computer. You can then use the remote control as a remote mouse.
5.Plug the power cord into the projector and then into an electrical outlet.
6.Turn on the projector first, and then the computer.
NOTE: Your DP1015 projector works best when the computer screen resolution is set to 1024 x 768 or less. To reset the computer screen resolution, see “Setting the Screen Resolution” on page 35.
8 | Xerox DP1015 User’s Guide |
