Connecting the Projector
Powering On/Off the Projector
To turn on the projector power
1.Remove the lens cap.
2.Make sure that the power cord and the cables from the video and audio sources are securely connected to the projector. The LED indicator flashes slowly.
3.Turn on the lamp by pressing and holding down the
Power button on the remote control or control panel. The LED indicator turns a steady green.
A
4.Turn on all the other connected components.
The projector then automatically detects the type of components attached to it.
After about 30 seconds, the image for your projection appears.
5.Press the Source key to view the image from the current video source.
If you have multiple video sources connected, press the
Source key or the 
keys to select among the sources.
6.(Optional, but recommended) Press the Auto/Enter button on the control panel to optimize the projector to the attached components.
If the screen displays “No Signal”, please make sure the signal cables are securely connected.
NOTE: Turn the projector on first, then the computer and other components.
Power
Lens cap
12 | Xerox DP1015 User’s Guide |
