Maintenance
6. Remove the cover.
7. Remove the three lamp module retaining screws.
8. Lift up the handle and pull out the lamp module.
Lamp Module
9.Put the new lamp module into the lamp bay and gently press it down. The lamp can only be inserted in one direction. If the lamp does not seem to fit, do not press down hard. Make sure the connections on the lamp module are aligned with the connectors in the lamp bay.
10.Replace the retaining screws, cover, and cover screw.
Make sure the cover is securely in place. If the cover is loose, the projector will not start.
28 | Xerox DP1015 User’s Guide |
