Preface
Xerox FS 3270, User's Guide
Preface
September 1997
This manual applies to the Xerox FS 3270 and the Xerox FS 3270 IPC protocol converters, installed with firmware release S10 xxx.xxx and S91 xxx.xxx, and to any subsequent release until otherwise specified.
NOTE:
Both products: “Xerox FS 3270” and “Xerox FS 3270 
IPC” will be referred to as “Xerox FS 3270” unless specific reference is made to the IPC functionality of the Xerox FS 3270 IPC.
The Xerox FS 3270 supports Coax, Centronics and RS232 inputs. The output is centronics. In FSL mode, the RS232 can be config ured to be either input or output (See Section 2.1. for further details).
The manual describes how the Xerox FS 3270 is connected and oper- ated. Read it before you start using the protocol conver ter, and keep the manual in a safe place for future referen ce.
It is assumed that the reader has a basic knowledge and under standing of IBM computer systems, especially the IBM 3270 Information Display System. It is also assumed that the reader has adequate knowledge of the printer which is going to be connected to the Xerox FS 3270 .
The Xerox FS 3270 can be used with most ASCII printers .
Related Manuals
Xerox FS 3270 IPC "IPDS Programmer’s Guide"
both converters
"Laser 3270, Programmer's Guide"
“IBM 3268 Printer Models 2 and 2C Description"
IBM Order No.
Contains information on the IBM 3268 printer which Xerox FS 3270 emulates.
- 2 -
