Xerox FS 3270 instruction manual PCL mode, Ascii HEX, FSL mode, N2data, Y76

Appendices

Xerox FS 3270, User's Guide

No.	Name	Syntax	Parameters	Deviations
75	Overwrite	PCL:	n1	PCL mode
	Translate	%Y75,<n1>[,n2],	00-BF = LU3 position
	Table	<data>[:n1,n2,	in HEX of
		<data>]%	character to
			be trans-
			lated
			n2
			1-8 = Symbol set
			defined in FSL
			74
			n3
			00-FF = Data in
			ASCII HEX
			required to
			print the
		-----------------	character
			---------------------	--------
		FSL:	n1	FSL mode
		%Y75,n1,n2[;n2]	LU3 char.
		[:n1,n2]%	00-BF =
			Specifies which LU3
			characters to be
			translated to
			parameter n2
			n2(data)
			00-FF =
			ASCII code as the LU3
			value shall be
			translated to. Can be
			defined as paired HEX
			up to 12 bytes,
			separated with
			commas.
76	Create APL	%Y76,<n1>%	1-8 = Create an APL	Y76:
	Translate		Translate Table	FSL only
	Table
77	Reset APL	%Y77,<n1>%	1-8 = Reset the
	Translate		indicated APL
	Table		table
78	Select APL	%Y78,<n1>%	1-8 = Select the
	Translate		indicated APL
	Table		table

- 52 -