Xerox FS 3270 instruction manual Setup Functions Supported in PCL mode

Programming

Xerox FS 3270, User's Guide

7.1. Setup Functions Supported in PCL mode

Y1	Set IBM Buffer Size
Y2	Set Default LPI
Y3	Set Default CPI
Y4	Set Default Line Spacing
Y5	Set Default Page Length (MPL)
Y6	Set Default Max. Print Position (MPP)
Y7	Set Case (Mono,Dual)
Y8	Set LU1 Language
Y10	Set Page Format
Y11	Set Default Paper Path
Y12	Set Default Paper Size
Y13	Line Overflow Condition
Y14	Enable Graphics Option (idaAFP)
Y15	RS-232 Baud Rate
Y16	RS-232 Word Length
Y17	RS-232 Parity
Y18	RS-232 Stop Bit
Y19	Set Simplex/Duplex
Y22	Printer Driver Selection
Y24	Serial Input/Output
Y25	FF Before Local Copy
Y26	FF After Local Copy
Y27	NON-SCS Print Image
Y28	NON-SCS, CR at MPP+1
Y29	NON-SCS, NL at MPP+1
Y30	NON-SCS, Valid FF Followed by data
Y31	NON-SCS, Valid FF at end of buffer
Y32	NON-SCS, FF Valid
Y33	NON-SCS, Automatic Func. at end of job
Y34	Last LF on page sent as FF
Y36	Suppress IBM control codes (parameters 0 and 1)
Y37	IBM Printer Emulation Select (parameters 0,1,2 & 4)
Y38	IBM Communication Feature (Query, EAB)
Y41	Generation of NL at EM
Y44	Suppress CR and SP
Y46	Set IRQ Timer
Y47	ESC Mode Selection
Y48	Set Permanent ESC Character
Y49	Restrict access of NVRAM settings
Y50	FF After Time Elapse
Y51	User-defined string(s) at Power-on
Y57	User-defined string before local copy
Y58	User-defined string after local copy
Y59	Bar Code Type Definition
Y60	Font Link

- 25 -