Replacing the Fuser Cartridge/BTR
16 |
17 |
Pull the tab to remove the BTR’s protective covering.
18 Plug in the power cord. Press and hold Online and Menu
Down while powering ON the printer. Depress the buttons until a row of black boxes are displayed on the first line of the Control Panel display. This will reset the Fuser Life counter and release the warning message.
After warming up for a few minutes, the Control Panel displays the following message:
Ready
If the Replace Fuser Cartridge message still appears, repeat Step 18.
If any other message is displayed, see Table 6.2 on page