Loading Paper
6 |
When feeding envelopes, slide the end of the envelope stopper over the end of the envelope stack. Refer to Figure 4.3 on page
The envelope stopper keeps envelopes from backing out of the stack while feeding.
7 Because the MBF does not have a paper size sensor, you must tell the printer which size paper is loaded via the MBF Size item in the Control Panel’s Tray Menu. The type of paper (plain, prepunched, letterhead, transparency, etc.) must also be set, using the Tray Menu’s MBF Type item.
See Chapter 3: Using the Control Panel for instructions on accessing menus.
When you send a job to the printer that requests a paper size that is different than the size currently in the MBF, the printer will perform as discussed in the section “Paper Size/Type Mismatch”
(page 4-23).
Chapter 4: Paper Loading and Orientation ❖