|
|
| Printer Operation Problems |
Table 7.1 Printer operation problems (continued) | |||
|
|
|
|
Problem |
|
| Action |
|
|
| |
PostScript commands are |
| 1. Make certain that the software application you are using to create your job is | |
printed instead of the |
| configured properly. Refer to your software documentation. | |
PostScript job. |
| 2. The job sent to the printer might have included an incorrect header, and | |
|
| ||
|
| therefore, not have indicated that a PostScript job was being sent. | |
|
| • Check your software to make sure the PostScript header file is being sent to | |
|
|
| the printer. |
|
| 3. Set the Print Errors item in the PostScript Menu to On and resend the job. | |
|
| • | If an error page prints, there is a problem in the PostScript coding. Correct |
|
|
| the coding problem and resend the job. |
|
| • | If the job still does not print and an error page was not printed, the job may |
|
|
| require additional memory. |
|
|
|
|
|
|
| Table 7.1 Page 3 of 4 |
|
|
|
|
Chapter 7: Troubleshooting ❖