Xerox Phaser 2135 manual 68 kg 149 lbs

■Place the printer on a level, solid surface with adequate strength for the weight of the machine. The base printer weight without any packaging materials is 68 kg (149 pounds).

■The printer is heavy, and must be lifted by three people. The illustration below shows the proper technique for lifting the printer.

68 kg

149 lbs.

0748-01

■Exercise care in moving or relocating the printer, it is back-heavy and could tip backward. Follow the recommended procedure when moving the printer from one location to another. Refer to the Phaser 2135 Setup Instructions.

■Do not place any liquids on the printer.

Warning

Be careful when working in areas inside the printer identified with a warning symbol. These areas may be very hot and could cause personal injury.

■Wait 10-15 seconds between switching the printer off and on.

■Keep hands, hair, neckties, etc., away from the exit and feed rollers. While printing, do not remove:

■the media source tray that you have selected in the driver or front panel

■any trays above the currently selected media source tray.

■Do not open the covers while printing.

0748-02