Xerox manual Paper Tips, Phaser 2135 Color Printer

Paper Tips

Paper Tips

Caution

Do not use any media designed for inkjet printers, especially inkjet coated paper and inkjet transparencies. Inkjet media are coated with a substance that can damage printer components. Damage caused by using unsupported media is not covered by the printer’s warranty. Always use Xerox Phaser media that has been specially designed for use with your printer.

Use only Phaser 35 Series Transparencies. Other transparencies may cause damage to the fuser. Any damage that is caused due to the use of unsupported media is not covered by your printer’s warranty. See Xerox Phaser 35 Series Transparencies on page 32.

■For a comprehensive list of media types, weights, sizes and part numbers, print the Paper Tips Page from the front panel. Press Menu until Support Menu is selected. Press the Value button until Print Paper Tips Page is selected. Press the Enter button.

■For specialty media, use the Multi-Sheet Bypass Feeder (MBF) with the side output tray open on the left side of the printer; refer to page 27.

■For best results, use Xerox Phaser paper; it is guaranteed to produce excellent results on your Phaser 2135 printer.

■A low-paper message is displayed when there are approximately 30 to 40 sheets of paper remaining in the paper tray.

■Auto tray switching is available. When one tray runs out of media, the printer switches to the next tray that contains the same media size. If you do not have a second tray, a Load Tray 1 message appears on the front panel.

■While printing, do not remove:

■the media source tray that you have selected in the driver or front panel.

■any trays above the currently selected media source tray.

16 Phaser 2135 Color Printer