17
■Selecting Patches
The AG-Stomp holds a total of 60 patch programs
(patch) in its internal memory. The 60 patches are
divided into two areas, ten banks and three patches.
• AREA
There are two areas, the USER AREA and the
PRESET AREA. Data in the USER AREA (30
patches) can be freely rewritten using the
STORE operation. Data in the PRESET AREA
(30 patches) can be edited but the contents can
not be rewritten to PRESET AREA memory.
When a USER AREA patch is selected, a “U”
will appear in the display’s hundred’s digit (U01-
U93).
When a PRESET AREA patch is selected, a “P”
will appear in the display’s hundred’s digit (P01-
P93).
*When the AG-Stomp is shipped, both the PRESET AREA
and USER AREA contain the same patch data. (Refer to
the supplemental [Patch List]).
• BANK
The 30 patches in each area are divided into ten
banks (0-9).
• PATCH
Each Bank contains three patches (1-3).
Try selecting some of the different patches and try
out some of the sounds.
To select a different patch, use one of the three
methods described below.

●Use the [UP]/[DOWN] buttons on the

panel.

• Each time the [UP] button is pressed, the next
greater patch number is selected.
U01 → U02 → U03 → U11 → U12 →
U13.....U91 → U92 → U93 → P01 →

P02.....P93 → U01(returns to the top)...

Each time the [DOWN] button is pressed, the
next lesser patch number is selected.
• Holding the [UP] button continuously increases
the bank number by one.
U01 → U11 → U21 → U31.....U91 →

P01 → P11.....P91 → U01 (returns to

the top)...
Holding the [DOWN] button continuously de-
creases the bank number by one.
• Simultaneously press the [UP] and [DOWN] but-
ton switches between the USER AREA and
PRESET AREA.

U01 ↔ P01

Using the AG-Stomp

• Patch Characteristics