19
Using the AG-Stomp
■Storing Patches
After editing or creating an original patch, your set-
tings can be stored in the USER AREA (U01-U93).
Try creating an original patch and store it.

●Storing Procedure

1. Press the [STORE] button.
When the Store Mode is entered, the display, the
STORE lamp and the Footswitch lamp that cor-
responds to the patch number will flash.
2. Select the patch (Bank and Patch Number) to
which you want to store the patch.
Use the same procedure as described in “Se-
lecting Patches” (page 17) to select the patch
number. You can also use the [UP]/[DOWN] but-
tons, Footswitches and BANK Switches to se-
lect the patch number. However, you cannot
change the AREA (data can only be written to
the USER AREA).
3. After selecting the patch number you want to
store your data in, hold the [STORE] button.
The store operation is complete when all the
lamps light.
*Utility mode settings are not stored in individual patches, they
are stored in the AG-Stomp’s memory as common settings for
all parameters.
*The OUTPUT knob’s setting is not stored in memory. Use the
Volume knob to set differences in volume for situations like
backing, soloing, etc.
*Data in the USER AREA (U01-U93) can be stored in an ex-
ternal MIDI device. (→ page 25)
*During the Store Operation, MIDI data can not be received.
The STORE operation is used not only to store your
original patches, but it can also be used to rearrange
your patches in an order suitable for use during live
performance.
■Other Convenient Functions
Here are some other convenient functions that you
can use with the AG-Stomp.

●Use Footswitches 1-3 to Switch the

Effects ON/OFF

Footswitch 1 can be used to act as an ON/OFF
switch for the Limiter, Footswitch 2 as an ON/OFF
switch for the Chorus/Delay Effect and Footswitch 3
as an ON/OFF switch for the Reverb Effect.
1. Press the [UTILITY] button and set the MIC TYPE
Select Switch to CONDENSER 1.
After entering the Utility Mode, “F.S” will appear
in the display followed by the currently selected
Footswitch Function.
•PrG : Select a patch
•EFF : Switch the effect block ON/OFF
2. Use the [UP]/[DOWN] buttons to set the
Footswitch Function to “EFF”.
3. Press the [UTILITY] button to return to the Play
Mode.
4. Now, pressing Footswitches 1-3 will switch the
corresponding effect ON/OFF.
*To select a different Bank or Area, press and hold the BANK
switch until the display and the Footswitch Lamp flashes. (→
page 18)

Limiter Chorus/

Delay Effect

Reverb

Effect