8
Nomenclature
!9 SPEED/TIME Control
Chorus effect: Sets the speed of the Chorus.
Delay effect: Sets the Delay time.
@0 DEPTH/FEEDBACK Control
Chorus effect: Sets the depth of the Chorus effect.
Delay effect: Sets how long the delay will repeat.
@1 LEVEL
Chorus effect: Sets the volume level of the Chorus
effect.
Delay effect: Sets the volume level of the Delay ef-
fect.
@2 Reverb Effect Buttons
(HALL/ROOM/PLATE)
These buttons select the type of reverb effect to be
used. The currently selected effect’s lamp will light.
@3 REVERB Volume
Sets the amount of Reverb that is added to the
guitar’s tone.
!5 Feedback Reduction Buttons
(FEEDBACK REDUCTION 1-5)
These switches are notch filters that are used to
eliminate feedback. The five notch filters can be used
to isolate and suppress those frequencies that are
causing the feedback.
The notch filter’s lamp will light when the correspond-
ing band’s filter is active. Up to five notch filters can
be used simultaneously.
!6 Frequency Control (FREQ)
Sets the frequency of the selected Feedback
Reduction’s Notch Filter. (→ page 16)
!7 DEPTH Control
Sets the depth of the selected Feedback Reduction’s
Notch Filter. (→ page 16)
!8 CHORUS/DELAY Effect Buttons
These buttons select the Chorus and Delay effects.
The currently selected effect’s lamp will light.
@4 Footswitches 1, 2, 3
Depending upon the settings in the Utility Mode (→
page 24), these switches can operate in the follow-
ing manner:
• Select a patch (1/2/3) from the currently selected Bank.
• Switch the Effect Blocks ON/OFF (1: Limiter, 2: Chorus/De-
lay, 3: Reverb)
@5 Bank Switch (AUTO F.R./BANK/TUNER)
•Press the switch when feedback occurs: The
AG-Stomp will automatically identify the prob-
lem frequency and apply a notch filter. (→ page
16)
•Hold the switch until the display flashes: Use
Footswitch 1 to change the Area, Footswitch 2
or 3 to select the Bank. (→ page 18)
•Hold the switch until “tu” appears in the dis-
play: Enters the Tuner Mode. (→ page 23)
●Footswitch Section@4 @5