27
●Set the Maximum Value of the EXP. Pedal
Sets the maximum value that indicates the position
of the EXP. Pedal.
Press the [FR 1] button and use the [UP]/[DOWN]
buttons to set the position (127-255).
You can also hold the [FR 1] button and move the
EXP. Pedal to set the position.
*Due to the relationship between the maximum and minimum
value, a value which results in a practical range of less than
128 can not be used.
*The value can not be set greater than that of the EXP. Pedal’s
Switch Setting.
Minimum
Value
Maximum
Value
Maximum
Adjustable
Range
Practical Effective
Range
●Transmitting Control Change Numbers from
the EXP. Pedal
Sets the MIDI control change number that is to be
transmitted when the EXP. pedal is used.
Press the [FR 2] button and use the [UP]/[DOWN]
buttons to set the control change number.
• oFF :MIDI is not transmitted
• 1-32, 64-95 :
The control change number that is to be
transmitted.
■Feedback Reduction OperatingMode
Press the [UTILITY] button and set the MIC TYPE
Select Switch to TUBE 1. After “F.r” appears in the
display, the current setting is displayed.
Use the [UP]/[DOWN] buttons to set the Feedback
Reduction Operating Mode.
• GLb :Even if the patch is changed, the same
Feedback Reduction parameters and
settings will remain active (the same as
the current condition).
• PrG :When patches are changed, the Feed-
back Reduction’s parameters and set-
tings will be changed to those that are
stored with the patch’s data.
Utility Mode