Yamaha AG-Stomp

Press the [LIMITER] button to set the receiving MIDI

PRG No. Use the [UP]/[DOWN] buttons to select

the number.

• 1-128 : MIDI Program Change No.

Press the [FR 1] button to set the AG-Stomp’s patch

number. Just as in selecting a patch number in the

Play Mode, use the [UP]/[DOWN] buttons or the

Footswitches to select.

• U01-U93, P01-P93 :

The patch number that is recalled.

●Create a MIDI Program Change Transmit Table

When a Footswitch (1-3) is pressed to recall a patch,

a MIDI Program Change Number can be transmit-

ted from the AG-Stomp’s MIDI OUT jack to control

an external effector, etc., from the AG-Stomp.

This table assigns to the patch, a MIDI PRG No.

that will be transmitted when the patch is recalled.

Press the [FR 2] button to set the AG-Stomp’s patch

number. Just as in selecting a patch number in the

Play Mode, use the [UP]/[DOWN] buttons or the

Footswitches to select.

• U01-U93, P01-P93 :

The patch number that is recalled.

Press the [FR 3] button to set the PRG. No. that will

be transmitted. Use the [UP]/[DOWN] buttons to set.

• 1-128 : MIDI Program Change No.

●Set the MIDI Receive Channel

Sets the AG-Stomp’s MIDI Receive Channel. The

MIDI channel set in this step is also used as the

device number for the bulk receive function.

Press the [FR 4] button and use the [UP]/[DOWN]

buttons to set the MIDI receive channel.

• oFF :MIDI messages are not received

• ALL :MIDI messages from all channels are

received

• 1-16 : MIDI channel over which messages are

received.

●Set the MIDI Transmit Channel

Sets the AG-Stomp’s MIDI Transmit Channel. The

MIDI channel set in this step is also used as the

device number for the bulk out function.

Press the [FR 5] button and use the [UP]/[DOWN]

buttons to set the MIDI transmit channel.

• 1-16 : MIDI channel over which messages are

transmitted.

●ON/OFF setting for MIDI Merge

Sets whether or not the MIDI signal that is received

via the AG-Stomp’s MIDI IN jack will also be trans-

mitted via the MIDI OUT jack.

Press the [CHORUS] button and use the [UP]/

[DOWN] buttons to set the merge setting.

• on :Data is retransmitted via the MIDI OUT

jack.

• oFF :Data is not retransmitted via the MIDI

OUT jack.

*When the merge function is set to on, data retransmitted via

the MIDI OUT jack is not confined to the channel set in the

MIDI Receive Channel setting so all data from all channels

will be transmitted.

●MIDI Bulk Out

This operation transmits data stored in the AG-

Stomp’s USER AREA as well as Utility Mode set-

tings to an external device, such as the YAMAHA

MDF3, etc., which can be used to store MIDI data

for back up.

Use a MIDI cable to connect the AG-Stomp’s MIDI

OUT jack to the MIDI IN jack of an external MIDI

device.

MIDI

OUT

MDF3, etc.

To send all USER AREA data (U01-U93) and

Utility Settings with the Bulk Out Operation

Press the [DELAY] button (“ALL” will appear in the

display), then press the [STORE] button to carry out

the MIDI Bulk Out operation.

To send a single USER AREA patch (data) with

the Bulk Out operation

After pressing the [HALL] button, select the patch

number to Bulk Out. Just as in selecting a patch

number in the Play Mode, use the [UP]/[DOWN]

buttons or the Footswitches to select the patch. Af-

ter selecting the patch, press the [STORE] button to

Utility Mode