Yamaha AG-Stomp

uio !0

Nomenclature

●Effect Section (Refer to the [Effect Functions and Parameters] section on page 21)

!3 LIMITER Button

Switches the Limiter ON (lamp lit) or OFF (lamp off).

!4 LEVEL

Adjusts the depth of the Limiter’s effect.

Turn to the right to increase the depth of the effect.

*When set to “0”, the Limiter will produce no effect.

uMIC TYPE Select Switch (MIC TYPE)

Selects a microphone simulator type.

In the Utility Mode, it is used to select functions you

want to set such as Footswitch or MIDI Functions,

etc.

iBLEND Control (BLEND/STEREO)

Controls the volume balance between the guitar’s

direct sound and the sound produced by the mic

simulator. (→ page 15)

When in the SHIFT mode, it is used to adjust the

mic simulator’s stereo setting. (→ page 15)

oVOLUME

Controls the absolute sound volume of that set by

the Tone Controls.

*The VOLUME knob’s setting is saved in memory.

!0 Tone Controls

(BASS, MIDDLE, TREBLE, PRESENCE)

Controls the level of the knob’s related tone frequen-

cies.

When in the SHIFT mode, they set the variable cen-

ter frequency of the related Tone Control. (→ page

14)

!1 OUTPUT Level Control

Controls the level of the signal delivered from the

AG-Stomp’s output jacks (OUTPUT, PHONES).

*The OUTPUT knob’s setting is not saved in memory.

!2 SHIFT Button

The button is used to enter the SHIFT mode in which

the Mic Simulator’s stereo setting and the Tone

Control’s variable center frequency settings can be

made. (→ page 14 and 15)

●Pre-Amp Section

!4 !6 !7 !9 @0 @1 @3

!8 @2!3