Yamaha CDR1000 Operating Notes

4

Chapter 1—Introduction

CDR1000—Owner’s Manual

Operating Notes

This section contains information that will help you get the most from your CDR1000.

Playback

The CDR1000 can play prerecorded audio CDs and unﬁnalized or ﬁnalized CD-R or

CD-RW discs. Only Session 1 of a multi-session disc can be played.

Recording

The CDR1000 can record onto CD-R and CD-RW discs that feature one of the follow-

ing logos.

The CDR1000 can record up to 99 tracks per disc and up to 99 indexes per track, the

standard for audio CDs. The minimum length of a track is four seconds, so even if you

stop recording before four seconds is up, the ﬁnal track will be four seconds long.

OPC

Each time an unﬁnalized CD-R or CD-RW disc is loaded, the CDR1000 performs an

OPC (Optimum Power Control) test to determine the optimum laser power necessary

for recording. During OPC testing, “OPC” appears on the display and no other func-

tions can be used until testing is complete.

For unﬁnalized CD-R discs, if OPC has been performed 94 times, ﬁnalization is per-

formed automatically. If an unﬁnalized CD-R disc on which OPC has been performed

more than 95 times is loaded, “OPC OVER” appears on the display, which means that

the disc cannot be used for recording. For this reason, we recommend that you do not

load unﬁnalized CD-R discs into the CDR1000 unnecessarily.

TOC & PMA

CDs store track and index numbers, track start and end times, and track length infor-

mation in a TOC (Table of Contents), which is read each time a disc is loaded into a CD

player. Since the ﬁnal TOC cannot be written to disc until all tracks have been recorded,

a temporary table of contents is written to the PMA (Program Memory Area), an area

of the disc reserved speciﬁcally for this purpose. While the temporary table of contents

is being written, “WAIT” appears on the display and no other functions can be used.

When a partially recorded disc is loaded, the CDR1000 reads the temporary table of

contents to see what’s already been recorded and determine the time available for addi-

tional recording.

DIGITAL AUDIO DIGITAL AUDIO

CD-R

Data

Consumer

digital audio

CD-RW

Contents

Main E PROFESSIONAL AUDIO CD RECORDER Keep This Manual For Future Reference. Owners Manual PROFESSIONAL AUDIO CD RECORDER POWER FCC INFORMATION (U.S.A.) IMPORTANT 1 2 3 JUISTE GEBRUIK EN BEHANDELING V AN BA TTERIJEN i Important Information Warnings Read the Following Before Operating the CDR1000 ii Handling Discs Cautions Note Contents 1 Introduction Transportation Pad Installation About this Manual CDR1000 Features Page Operating Notes Page 2 Touring the CDR1000 I H G Page 8 Display 88 88 88 88 CDR1000 K L Function Buttons A B C 1 2 3 4 10 D E F G Rear Panel A B C D 12 Remote Controller 14 Block Diagram The Basics 15 3 The Basics Hookup Examples Analog Coaxial AES/EBU Connecting the Power Cord Turning On the Power Using the Transportation Pad Installing the Transportation Pad 18 Loading & Unloading Discs Disc Type & Status Using the Remote Controller Installing the Remote Controllers Batteries Setting the Time Display 20 Monitoring Metering & Peak Hold Setting the Meter Response Rate 4 Playback Playing Discs Pausing Playback Stopping Playback 22 Playback Operation Table Selecting Tracks Selecting Tracks Directly Selecting Indexes 24 Searching Using Repeat Playback One-track Repeat Playback All-track Repeat Playback A-B Repeat Playback 5 Recording Preparing to Record Selecting the Input Source 26 Setting the Sampling Rate Converter Setting the Input Delay 28 Setting the UV22 Setting the Copy Bit Recording 30 Recording Operation Table 31 Recording Operation Table 32 Incrementing Track Numbers Manually Incrementing Index Numbers Manually 34 Using Auto Rec Start & Track Increment Inserting a Two-second Mute Inserting a Mute at the Beginning of a Track 36 Inserting a Mute at the End of a Track Applying a Fade In 38 Applying a Fade Out Sync Recording from CD, MD, or DAT 40 One-track Sync Recording Page 42 All-track Sync Recording Page 44 Finalizing Discs Erasing Discs (CD-RW only) 46 6 Other Functions Selecting the AES/EBU OUT Playback Clock Selecting the AES/EBU OUT Playback Clock 47 Note: If the message OUT OF RANGE appears while monitoring, stop and reset the sampling rate. Wordclock out WORD CLOCK IN (wordclock slave, source: WORD) 00 00 00 00 mYGDAI YGDAI Using Digital Output Thru Using Digital Output Thru 49 CDR1000 (source machine) PARALLEL AES/EBU OUT PARALLEL AES/EBU IN AES/EBU OUT AES/EBU IN Using a Footswitch Disabling the Remote Controller Using the Parallel Port Parallel Port Pin Conguration 52 Troubleshooting Troubleshooting 53 54 Appendix Error Messages If the CDR1000 displays an error message, follow the instructions below. Specifications 55 Specications 56 Analog Input Analog Output Digital Audio Input Digital Audio Output Dimensions 58 Glossary Index A B C D O P R S T