Troubleshooting 53
CDR1000—Owner’s Manual
The SRC indicator lights up while
recording.
The SRC indicator lights up when the SRC (Sampling Rate Converter) is
active. See “Setting the Sampling Rate Converter” on page 26 for more
information.
Sync Recording does not start
automatically when recording
from CD or MD.
CD and MD players must be stopped or paused, as Sync Recording
cannot be started while the source device is playing. See “Sync Record-
ing from CD, MD, or DAT” on page 39 for more information.
Using One-track Sync Recording,
recording stops before the end of
the track when recording from a
DAT tape.
Recording stops when the CDR1000 receives a Track Number, Start ID,
or Skip ID. Make sure that there isn’t a Skip ID in the middle of the track
being recorded. See “Sync Recording from CD, MD, or DAT” on page
39 for more information.
Using Sync Recording, the top of a
track is cut off when recording
from a DAT tape.
Make sure that the DAT Start IDs are positioned slightly before the start
of each track. See “Sync Recording from CD, MD, or DAT” on page 39
for more information.
Sync Recording stops
unexpectedly.
If no input signal is received for 20 or more seconds, Sync Recording
stops automatically. See “Sync Recording from CD, MD, or DAT” on
page 39 for more information.
Symptom Advice