Yamaha CDR1000 Inserting a Two-second Mute

Inserting a Two-second Mute 35

CDR1000—Owner’s Manual

Inserting a Two-second Mute

A two-second mute, or silent section can be inserted at the beginning or end of each

track. To insert a mute at the beginning of a track, Rec Mute Standby mode is engaged

by pressing the [REC MUTE] button while the CDR1000 waits in Record Standby

mode, the mute is then inserted when recording starts. To insert a mute at the end of a

track, Rec Mute Standby mode is engaged by pressing the [REC MUTE] button during

recording, the mute is then inserted when recording is stopped in the normal way by

pressing the [PAUSE] button, [STOP] button, or footswitch. If the Fade Out function

is set, the mute is inserted after the fade out.

Rec Mute can be used with One-track Sync Recording, but not with All-track Sync

Recording.

Rec Mute cannot insert a two-second mute at the beginning of track 1, since a mute is

inserted there automatically.

Inserting a Mute at the Beginning of a Track

The following illustration shows the procedure for inserting a mute at the beginning of

a track.

1Engage Record Standby mode, as explained on page 29.

See page 40 for information on engaging Record Standby mode with One-track Sync

Recording.

2Press the [REC MUTE] button.

Rec Mute Standby mode is engaged and the REC MUTE indicator ﬂashes.

3Start recording.

A two-second silent section is inserted and then the REC MUTE indicator goes out

Only one mute can be inserted at the beginning of each track. Technically speaking, the

mute is inserted into Index 0.

2-second

mute

Record

Standby

mode

Rec Mute

Standby

mode

REC

Recording starts

PLAY

REC

MUTE

Contents

Main E PROFESSIONAL AUDIO CD RECORDER Keep This Manual For Future Reference. Owners Manual PROFESSIONAL AUDIO CD RECORDER POWER FCC INFORMATION (U.S.A.) IMPORTANT 1 2 3 JUISTE GEBRUIK EN BEHANDELING V AN BA TTERIJEN i Important Information Warnings Read the Following Before Operating the CDR1000 ii Handling Discs Cautions Note Contents 1 Introduction Transportation Pad Installation About this Manual CDR1000 Features Page Operating Notes Page 2 Touring the CDR1000 I H G Page 8 Display 88 88 88 88 CDR1000 K L Function Buttons A B C 1 2 3 4 10 D E F G Rear Panel A B C D 12 Remote Controller 14 Block Diagram The Basics 15 3 The Basics Hookup Examples Analog Coaxial AES/EBU Connecting the Power Cord Turning On the Power Using the Transportation Pad Installing the Transportation Pad 18 Loading & Unloading Discs Disc Type & Status Using the Remote Controller Installing the Remote Controllers Batteries Setting the Time Display 20 Monitoring Metering & Peak Hold Setting the Meter Response Rate 4 Playback Playing Discs Pausing Playback Stopping Playback 22 Playback Operation Table Selecting Tracks Selecting Tracks Directly Selecting Indexes 24 Searching Using Repeat Playback One-track Repeat Playback All-track Repeat Playback A-B Repeat Playback 5 Recording Preparing to Record Selecting the Input Source 26 Setting the Sampling Rate Converter Setting the Input Delay 28 Setting the UV22 Setting the Copy Bit Recording 30 Recording Operation Table 31 Recording Operation Table 32 Incrementing Track Numbers Manually Incrementing Index Numbers Manually 34 Using Auto Rec Start & Track Increment Inserting a Two-second Mute Inserting a Mute at the Beginning of a Track 36 Inserting a Mute at the End of a Track Applying a Fade In 38 Applying a Fade Out Sync Recording from CD, MD, or DAT 40 One-track Sync Recording Page 42 All-track Sync Recording Page 44 Finalizing Discs Erasing Discs (CD-RW only) 46 6 Other Functions Selecting the AES/EBU OUT Playback Clock Selecting the AES/EBU OUT Playback Clock 47 Note: If the message OUT OF RANGE appears while monitoring, stop and reset the sampling rate. Wordclock out WORD CLOCK IN (wordclock slave, source: WORD) 00 00 00 00 mYGDAI YGDAI Using Digital Output Thru Using Digital Output Thru 49 CDR1000 (source machine) PARALLEL AES/EBU OUT PARALLEL AES/EBU IN AES/EBU OUT AES/EBU IN Using a Footswitch Disabling the Remote Controller Using the Parallel Port Parallel Port Pin Conguration 52 Troubleshooting Troubleshooting 53 54 Appendix Error Messages If the CDR1000 displays an error message, follow the instructions below. Specifications 55 Specications 56 Analog Input Analog Output Digital Audio Input Digital Audio Output Dimensions 58 Glossary Index A B C D O P R S T