Manuals / Brands / Home Audio / CD Player / Yamaha / Home Audio / CD Player

Yamaha CDR1000 42 , All-track Sync Recording

1 67

Download 67 pages, 969.35 Kb

42 Chapter 5—Recording

CDR1000—Owner’s Manual

All-track Sync Recording

This section explains how to use All-track Sync Recording.

The following illustration shows the procedure for All-track Sync Recording.

1Prepare for recording, as explained on page 25, setting the input source to

COAX, but instead of proceeding to the Recording section, proceed as fol-

lows.

2From stop, press the [SYNC REC] button.

Record Standby mode is engaged, “SYNC-REC 1” appears on the display, the PAUSE

indicator lights up, and the REC indicators ﬂash. If the loaded disc is a blank disc, track

1 is selected for recording. If it’s a partially recorded disc, the next available track is

selected.

3Use the [PREV] and [NEXT] button to select All-track Sync Recording mode.

“SYNC-REC ALL” appears on the display.

You can cancel All-track Sync Recording at anytime by pressing the [STOP] button.

The LOCK indicator should appear, indicating that the CDR1000 is locked to the

incoming digital signal. Sync Recording is not possible if the LOCK indicator does not

light up or is ﬂashing. See “Selecting the Input Source” on page 25 for more informa-

tion.

In Record Standby mode, the selected input source can be monitored via the ANALOG

OUT, AES/EBU OUT, COAXIAL OUT, or PHONES, and metered on the CDR1000

level meters.

Discs can be ﬁnalized automatically when Sync Recording is stopped, using the Auto

Finalize function. Press the [SYNC REC] button while Record Standby mode is

engaged to turn on the Auto Finalize function. “AUTOFINALIZE” appears on the dis-

play. Press again to cancel Auto Finalize. See page 44 for more information on ﬁnalizing

discs.

4Start playback on the CD, MD, or DAT player.

Recording starts, the PAUSE indicator goes out, the REC indicators light up continu-

ously, the PLAY indicators light up, and the time counter starts counting. The track and

index numbers are incremented as and when Track and Index Numbers are received.

Note: If no input signal is received for 20 seconds or more during Sync Recording, Record-

ing stops automatically.

(SYNC-REC ALL)

Tn=1

Recording starts

Track Number

or Start ID

Recording stops

Track Number

or Start ID

Tn=2

Track Number

or Start ID

Tn=3

20 seconds afte

r

end of source

SYNC

REC

Contents

Main E PROFESSIONAL AUDIO CD RECORDER Keep This Manual For Future Reference. Owners Manual PROFESSIONAL AUDIO CD RECORDER POWER FCC INFORMATION (U.S.A.) IMPORTANT 1 2 3 JUISTE GEBRUIK EN BEHANDELING V AN BA TTERIJEN i Important Information Warnings Read the Following Before Operating the CDR1000 ii Handling Discs Cautions Note Contents 1 Introduction Transportation Pad Installation About this Manual CDR1000 Features Page Operating Notes Page 2 Touring the CDR1000 I H G Page 8 Display 88 88 88 88 CDR1000 K L Function Buttons A B C 1 2 3 4 10 D E F G Rear Panel A B C D 12 Remote Controller 14 Block Diagram The Basics 15 3 The Basics Hookup Examples Analog Coaxial AES/EBU Connecting the Power Cord Turning On the Power Using the Transportation Pad Installing the Transportation Pad 18 Loading & Unloading Discs Disc Type & Status Using the Remote Controller Installing the Remote Controllers Batteries Setting the Time Display 20 Monitoring Metering & Peak Hold Setting the Meter Response Rate 4 Playback Playing Discs Pausing Playback Stopping Playback 22 Playback Operation Table Selecting Tracks Selecting Tracks Directly Selecting Indexes 24 Searching Using Repeat Playback One-track Repeat Playback All-track Repeat Playback A-B Repeat Playback 5 Recording Preparing to Record Selecting the Input Source 26 Setting the Sampling Rate Converter Setting the Input Delay 28 Setting the UV22 Setting the Copy Bit Recording 30 Recording Operation Table 31 Recording Operation Table 32 Incrementing Track Numbers Manually Incrementing Index Numbers Manually 34 Using Auto Rec Start & Track Increment Inserting a Two-second Mute Inserting a Mute at the Beginning of a Track 36 Inserting a Mute at the End of a Track Applying a Fade In 38 Applying a Fade Out Sync Recording from CD, MD, or DAT 40 One-track Sync Recording Page 42 All-track Sync Recording Page 44 Finalizing Discs Erasing Discs (CD-RW only) 46 6 Other Functions Selecting the AES/EBU OUT Playback Clock Selecting the AES/EBU OUT Playback Clock 47 Note: If the message OUT OF RANGE appears while monitoring, stop and reset the sampling rate. Wordclock out WORD CLOCK IN (wordclock slave, source: WORD) 00 00 00 00 mYGDAI YGDAI Using Digital Output Thru Using Digital Output Thru 49 CDR1000 (source machine) PARALLEL AES/EBU OUT PARALLEL AES/EBU IN AES/EBU OUT AES/EBU IN Using a Footswitch Disabling the Remote Controller Using the Parallel Port Parallel Port Pin Conguration 52 Troubleshooting Troubleshooting 53 54 Appendix Error Messages If the CDR1000 displays an error message, follow the instructions below. Specifications 55 Specications 56 Analog Input Analog Output Digital Audio Input Digital Audio Output Dimensions 58 Glossary Index A B C D O P R S T