Yamaha CDR1000 6 Other Functions

46 Chapter 6—Other Functions

CDR1000—Owner’s Manual

6 Other Functions

Selecting the AES/EBU OUT Playback Clock

When recording, the AES/EBU OUT outputs digital audio at 44.1 kHz. For playback,

however, the AES/EBU OUT can be wordclock locked to an external wordclock source.

If the selected wordclock source is not running at 44.1 kHz, the CDR1000’s built-in

sampling-rate converter converts the 44.1 kHz audio from the CD up or down accord-

ingly. This is useful when CD material needs to be transferred to a digital audio system

in which all digital audio equipment is locked to a common wordclock.

The COAXIAL OUT always outputs digital audio at 44.1 kHz.

The Utility Playback Clock parameter is used to set the AES/EBU OUT playback clock.

1Use the [UTILITY] button to select “CLK SEL.”

The UTILITY indicator lights up and the Playback Clock setting appears on the display.

2Use the [PREV] and [NEXT] buttons to select the Playback Clock.

3Press and hold the [UTILITY] button, or press another button to cancel Utility.

In the following example, the CDR1000 is used in conjunction with a digital multitrack

recorder and digital mixing console, as the playback source for CD material. Digital

audio is transferred from the CDR1000 to the digital mixing console via an AES/EBU

digital connection. The digital multitrack recorder is the wordclock master, and the dig-

ital mixing console and CDR1000 are wordclock slaves. In order to record from a con-

ventional CD player, the wordclock setup would have to be reconﬁgured so that the CD

player was the wordclock master and the digital multitrack recorder and digital mixing

console were wordclock slaves. The CDR1000’s ability to lock the AES/EBU OUT to an

external wordclock source, however, eliminates the need to reconﬁgure the system.

Setting Description

INT AES/EBU OUT wordclock derived internally (ﬁxed at 44.1 kHz).

WORD AES/EBU OUT wordclock derived from the WORD CLOCK IN.

AES AES/EBU OUT wordclock derived from the AES/EBU IN. If the input

source is set to COAX, record monitoring is not possible via the AES/EBU

OUT.

COAX AES/EBU OUT wordclock derived from the COAXIAL IN. If the input

source is set to AES/EBU, record monitoring is not possible via the

AES/EBU OUT.

Contents

Main E PROFESSIONAL AUDIO CD RECORDER Keep This Manual For Future Reference. Owners Manual PROFESSIONAL AUDIO CD RECORDER POWER FCC INFORMATION (U.S.A.) IMPORTANT 1 2 3 JUISTE GEBRUIK EN BEHANDELING V AN BA TTERIJEN i Important Information Warnings Read the Following Before Operating the CDR1000 ii Handling Discs Cautions Note Contents 1 Introduction Transportation Pad Installation About this Manual CDR1000 Features Page Operating Notes Page 2 Touring the CDR1000 I H G Page 8 Display 88 88 88 88 CDR1000 K L Function Buttons A B C 1 2 3 4 10 D E F G Rear Panel A B C D 12 Remote Controller 14 Block Diagram The Basics 15 3 The Basics Hookup Examples Analog Coaxial AES/EBU Connecting the Power Cord Turning On the Power Using the Transportation Pad Installing the Transportation Pad 18 Loading & Unloading Discs Disc Type & Status Using the Remote Controller Installing the Remote Controllers Batteries Setting the Time Display 20 Monitoring Metering & Peak Hold Setting the Meter Response Rate 4 Playback Playing Discs Pausing Playback Stopping Playback 22 Playback Operation Table Selecting Tracks Selecting Tracks Directly Selecting Indexes 24 Searching Using Repeat Playback One-track Repeat Playback All-track Repeat Playback A-B Repeat Playback 5 Recording Preparing to Record Selecting the Input Source 26 Setting the Sampling Rate Converter Setting the Input Delay 28 Setting the UV22 Setting the Copy Bit Recording 30 Recording Operation Table 31 Recording Operation Table 32 Incrementing Track Numbers Manually Incrementing Index Numbers Manually 34 Using Auto Rec Start & Track Increment Inserting a Two-second Mute Inserting a Mute at the Beginning of a Track 36 Inserting a Mute at the End of a Track Applying a Fade In 38 Applying a Fade Out Sync Recording from CD, MD, or DAT 40 One-track Sync Recording Page 42 All-track Sync Recording Page 44 Finalizing Discs Erasing Discs (CD-RW only) 46 6 Other Functions Selecting the AES/EBU OUT Playback Clock Selecting the AES/EBU OUT Playback Clock 47 Note: If the message OUT OF RANGE appears while monitoring, stop and reset the sampling rate. Wordclock out WORD CLOCK IN (wordclock slave, source: WORD) 00 00 00 00 mYGDAI YGDAI Using Digital Output Thru Using Digital Output Thru 49 CDR1000 (source machine) PARALLEL AES/EBU OUT PARALLEL AES/EBU IN AES/EBU OUT AES/EBU IN Using a Footswitch Disabling the Remote Controller Using the Parallel Port Parallel Port Pin Conguration 52 Troubleshooting Troubleshooting 53 54 Appendix Error Messages If the CDR1000 displays an error message, follow the instructions below. Specifications 55 Specications 56 Analog Input Analog Output Digital Audio Input Digital Audio Output Dimensions 58 Glossary Index A B C D O P R S T