56 Appendix
CDR1000—Owner’s Manual
Analog Input
Analog Output
Digital Audio Input
Digital Audio Output
Connection Impedance Input Level Max. Level Connector
ANALOG IN1
1. 20-bit 64-times oversampling A/D converter.
20 kΩ–10 dBV/+4 dB2
2. Switchable.
+18 dB/+4 dB3
3. Nominal record level
XLR-3-31 type
(balanced)4
4. XLR-type connectors are balanced (pin 1 = ground, pin 2 = hot, pin 3 = cold).
* Where dB represents a specific voltage, 0 dB is referenced to 0.775 V rms.
* For –10 dBV levels, 0 dBV is referenced to 0 dBV.
Connection Impedance Output Level Max. Level Connector
ANALOG OUT1
1. 20-bit 128-times oversampling D/A converter.
150 Ω lines +4 dB +18 dB XLR-3-32 type
(balanced)2
2. XLR-type connectors are balanced (pin 1 = ground, pin 2 = hot, pin 3 = cold).
PHONES 40 Ω7 mW 100 mW Stereo phone jack
(unbalanced)3
3. PHONES stereo phone jack is unbalanced (tip = left, ring = right, sleeve = ground).
* Where dB represents a specific voltage, 0 dB is referenced to 0.775 V rms.
Connection Format Level/Impedance Connector
AES/EBU IN AES/EBU 110 ΩXLR-3-31 type
COAXIAL IN IEC-60958
Consumer Use
0.5 V pp
(75 Ω)Phono
Connection Format Level/Impedance Connector
AES/EBU OUT AES/EBU 110 ΩXLR-3-32 type
COAXIAL OUT IEC-60958
Consumer Use
0.5 V pp
(75 Ω)Phono