Manuals / Brands / Home Audio / CD Player / Yamaha / Home Audio / CD Player

Yamaha CDR1000 Using Auto Rec Start & Track Increment

1 67

Download 67 pages, 969.35 Kb

34 Chapter 5—Recording

CDR1000—Owner’s Manual

Using Auto Rec Start & Track Increment

Recording can be started automatically, and track numbers incremented automatically

using the Auto Rec/Track function, which monitors the selected input source and starts

recording from Record Standby mode when the signal level exceeds the speciﬁed

threshold, and subsequently increments the track number when the signal level exceeds

the speciﬁed threshold after being below it for three or more seconds.

Auto Rec/Track cannot be used with Sync Recording.

The following illustration shows the procedure for recording with the Auto Rec/Track

function.

The Utility TRACK INC dB parameter is used to set the threshold level.

1Use the [UTILITY] button to select “TRACK INC dB.”

The UTILITY indicator lights up and the TRACK INC dB setting appears on the dis-

play.

2Use the [PREV] or [NEXT] button to set the TRACK INC dB parameter.

3Press and hold the [UTILITY] button, or press another button to cancel Utility.

4From stop, press the [REC] button to engage Record Standby mode.

See page 29 for more information on Record Standby mode.

5Press the [AUTO] button to turn on the Auto Rec/Track function.

The AUTO indicator lights up.

When the input signal level exceeds the speciﬁed threshold, recording starts automati-

cally. When the signal level exceeds the speciﬁed threshold after being below it for three

or more seconds, the track number is incremented automatically.

If the level of the input signal is below the speciﬁed threshold for 20 seconds or more,

recording stops. You can prevent this by pressing the [AUTO] button to turn off the

Auto Rec/Track function.

6Press the [AUTO] button again to cancel the Auto Rec/Track function.

The AUTO indicator goes out.

Threshold Description

–30, –35, –40, –45, –50, –55,

–60, –65, –70, –96 Auto Rec/Track threshold in dB.

3 s

Input signal

Stop

Tn=1

Threshold (dB)

Tn=2 Tn=3

3 s 20 s

Record

Standby

mode

(TRACK INC dB)

REC

Recording

starts

UTILITY AUTO

1 2 3

Contents

Main E PROFESSIONAL AUDIO CD RECORDER Keep This Manual For Future Reference. Owners Manual PROFESSIONAL AUDIO CD RECORDER POWER FCC INFORMATION (U.S.A.) IMPORTANT 1 2 3 JUISTE GEBRUIK EN BEHANDELING V AN BA TTERIJEN i Important Information Warnings Read the Following Before Operating the CDR1000 ii Handling Discs Cautions Note Contents 1 Introduction Transportation Pad Installation About this Manual CDR1000 Features Page Operating Notes Page 2 Touring the CDR1000 I H G Page 8 Display 88 88 88 88 CDR1000 K L Function Buttons A B C 1 2 3 4 10 D E F G Rear Panel A B C D 12 Remote Controller 14 Block Diagram The Basics 15 3 The Basics Hookup Examples Analog Coaxial AES/EBU Connecting the Power Cord Turning On the Power Using the Transportation Pad Installing the Transportation Pad 18 Loading & Unloading Discs Disc Type & Status Using the Remote Controller Installing the Remote Controllers Batteries Setting the Time Display 20 Monitoring Metering & Peak Hold Setting the Meter Response Rate 4 Playback Playing Discs Pausing Playback Stopping Playback 22 Playback Operation Table Selecting Tracks Selecting Tracks Directly Selecting Indexes 24 Searching Using Repeat Playback One-track Repeat Playback All-track Repeat Playback A-B Repeat Playback 5 Recording Preparing to Record Selecting the Input Source 26 Setting the Sampling Rate Converter Setting the Input Delay 28 Setting the UV22 Setting the Copy Bit Recording 30 Recording Operation Table 31 Recording Operation Table 32 Incrementing Track Numbers Manually Incrementing Index Numbers Manually 34 Using Auto Rec Start & Track Increment Inserting a Two-second Mute Inserting a Mute at the Beginning of a Track 36 Inserting a Mute at the End of a Track Applying a Fade In 38 Applying a Fade Out Sync Recording from CD, MD, or DAT 40 One-track Sync Recording Page 42 All-track Sync Recording Page 44 Finalizing Discs Erasing Discs (CD-RW only) 46 6 Other Functions Selecting the AES/EBU OUT Playback Clock Selecting the AES/EBU OUT Playback Clock 47 Note: If the message OUT OF RANGE appears while monitoring, stop and reset the sampling rate. Wordclock out WORD CLOCK IN (wordclock slave, source: WORD) 00 00 00 00 mYGDAI YGDAI Using Digital Output Thru Using Digital Output Thru 49 CDR1000 (source machine) PARALLEL AES/EBU OUT PARALLEL AES/EBU IN AES/EBU OUT AES/EBU IN Using a Footswitch Disabling the Remote Controller Using the Parallel Port Parallel Port Pin Conguration 52 Troubleshooting Troubleshooting 53 54 Appendix Error Messages If the CDR1000 displays an error message, follow the instructions below. Specifications 55 Specications 56 Analog Input Analog Output Digital Audio Input Digital Audio Output Dimensions 58 Glossary Index A B C D O P R S T