Manuals / Brands / Home Audio / CD Player / Yamaha / Home Audio / CD Player

Yamaha CDR1000 Searching, Using Repeat Playback

1 67

Download 67 pages, 969.35 Kb

24 Chapter 4—Playback

CDR1000—Owner’s Manual

Searching

You can search the program material at high speed using the SEARCH [ ] and [ ]

buttons during playback or playback pause.

1Press and hold the backward SEARCH [ ] button to search backwards.

The CDR1000 searches backwards from the current position and the PLAY indicators

go out. If the top of the current track is reached, searching continues into the previous

track. If the top of the ﬁrst track is reached, searching stops.

When the SEARCH [ ] button is released, the previous mode—playback or playback

pause—is resumed and the relevant indicators light up.

2Press and hold the forward SEARCH [] button to search forwards.

The CDR1000 searches forwards from the current position and the PLAY indicators go

out. If the end of the current track is reached, searching continues into the next track.

If the end of the last track is reached, searching stops.

While searching is in progress, playback signals are output by the ANALOG OUT and

PHONES only, the AES/EBU OUT and COAXIAL OUT are muted.

Using Repeat Playback

The CDR1000 provides three types of repeat playback: One-track Repeat, in which the

current track plays repeatedly, All-track Repeat, which plays all tracks repeatedly, and

A-B Repeat, which repeatedly plays the region between the speciﬁed A and B points.

One-track Repeat Playback

1Press the [REPEAT] button.

One-track Repeat playback starts and “REPEAT 1” appears on the display.

2Press the [REPEAT] button twice to cancel One-track Repeat playback.

Normal playback resumes and “REPEAT 1” disappears from the display.

All-track Repeat Playback

1Press the [REPEAT] button twice.

All-track Repeat playback starts and “REPEAT ALL” appears on the display.

2Press the [REPEAT] button to cancel All-track Repeat playback.

Normal playback resumes and “REPEAT ALL” disappears from the display.

A-B Repeat Playback

1Press the [A-B] button to set the A point.

The A point is set and “REPEAT A” appears on the display.

The A and B points can be in the same track or in different tracks.

2Press the [A-B] button again to set the B point.

Playback repeats between the A and B points and “REPEAT AB” appears on the display.

3Press the [A-B] button again to cancel A-B Repeat playback.

Normal playback resumes and “REPEAT AB” disappears from the display.

Contents

Main E PROFESSIONAL AUDIO CD RECORDER Keep This Manual For Future Reference. Owners Manual PROFESSIONAL AUDIO CD RECORDER POWER FCC INFORMATION (U.S.A.) IMPORTANT 1 2 3 JUISTE GEBRUIK EN BEHANDELING V AN BA TTERIJEN i Important Information Warnings Read the Following Before Operating the CDR1000 ii Handling Discs Cautions Note Contents 1 Introduction Transportation Pad Installation About this Manual CDR1000 Features Page Operating Notes Page 2 Touring the CDR1000 I H G Page 8 Display 88 88 88 88 CDR1000 K L Function Buttons A B C 1 2 3 4 10 D E F G Rear Panel A B C D 12 Remote Controller 14 Block Diagram The Basics 15 3 The Basics Hookup Examples Analog Coaxial AES/EBU Connecting the Power Cord Turning On the Power Using the Transportation Pad Installing the Transportation Pad 18 Loading & Unloading Discs Disc Type & Status Using the Remote Controller Installing the Remote Controllers Batteries Setting the Time Display 20 Monitoring Metering & Peak Hold Setting the Meter Response Rate 4 Playback Playing Discs Pausing Playback Stopping Playback 22 Playback Operation Table Selecting Tracks Selecting Tracks Directly Selecting Indexes 24 Searching Using Repeat Playback One-track Repeat Playback All-track Repeat Playback A-B Repeat Playback 5 Recording Preparing to Record Selecting the Input Source 26 Setting the Sampling Rate Converter Setting the Input Delay 28 Setting the UV22 Setting the Copy Bit Recording 30 Recording Operation Table 31 Recording Operation Table 32 Incrementing Track Numbers Manually Incrementing Index Numbers Manually 34 Using Auto Rec Start & Track Increment Inserting a Two-second Mute Inserting a Mute at the Beginning of a Track 36 Inserting a Mute at the End of a Track Applying a Fade In 38 Applying a Fade Out Sync Recording from CD, MD, or DAT 40 One-track Sync Recording Page 42 All-track Sync Recording Page 44 Finalizing Discs Erasing Discs (CD-RW only) 46 6 Other Functions Selecting the AES/EBU OUT Playback Clock Selecting the AES/EBU OUT Playback Clock 47 Note: If the message OUT OF RANGE appears while monitoring, stop and reset the sampling rate. Wordclock out WORD CLOCK IN (wordclock slave, source: WORD) 00 00 00 00 mYGDAI YGDAI Using Digital Output Thru Using Digital Output Thru 49 CDR1000 (source machine) PARALLEL AES/EBU OUT PARALLEL AES/EBU IN AES/EBU OUT AES/EBU IN Using a Footswitch Disabling the Remote Controller Using the Parallel Port Parallel Port Pin Conguration 52 Troubleshooting Troubleshooting 53 54 Appendix Error Messages If the CDR1000 displays an error message, follow the instructions below. Specifications 55 Specications 56 Analog Input Analog Output Digital Audio Input Digital Audio Output Dimensions 58 Glossary Index A B C D O P R S T