Front and Rear of Unit

Rear Panel

The CRW8824S drive’s rear panel features the following:

ID SELECT PARITY

AUDIO OUTTERMINATOR

SCSI connector

Insert the connector of the SCSI ribbon cable here. Make sure you align the red line of the ribbon cable with pin 1 of the drive’s connector, marked “SCSI

INTERFACE CONNECTOR 1.”

SCSI

INTERFACE

CONNECTOR

DC INPUT

R G L 1 2 4

BLOCK SIZE

1 +5V G +12V

AUDIO OUT connector

Connect one end of the 4su-pinpliedaudio4- cablepin audioto thiscableand theothisotherandendtheto yourothercomputer’send to your scoundmputer’scard soundor builtcard-inoraudiobuilt-in. audio.

1 2 4

ID SELECT PARITY TERMINATOR BLOCK SIZE

DC INPUT connector Insert the power connector from your computer’s power supply in this socket to feed power to the drive.

1ID SELECT jumper switches Set these switches using black plastic shunts in order to manually assign a SCSI ID number for the drive.

2PARITY jumper switch

Set this switch using a black plastic shunt in order to enable parity checking.

3TERMINATOR jumper switch Set this switch using a black plastic shunt in order to enable the drive’s built-in SCSI termination.

4BLOCK SIZE jumper switch

Set this switch using a black plastic shunt in order to set the block size to 512 bytes per sector.

7