Setup Flowchart

This flowchart shows the procedure for setting up the CRW8824S drive. For easy cross-referencing, the relevant pages in this manual are also given.

STEP Do you have a SCSI adapter 1 card?

YES

STEP Check that the SCSI adapter

NO

STEP

1-1

STEP

Obtain a SCSI adapter card

Recommended models: Adaptec AHA-2940-series (PCI)

Install the SCSI adapter card

2 card is recognized correctly

Go to Control Panel System Device Manager tab. Double-click on SCSI controllers to check that the adapter card is recognized correctly by the computer’s OS.

1-2

Read this manual and insert the SCSI card into the appropriate PCI slot on the computer.

STEP Set up the CRW8824S drive

3

1.

Set the jumper switches (P.10)

2.

Fit the drive into the computer

 

Tower● -type case (P.14)

As additional or replacement drive

Desktop● -type case (P.22)

As a replacement drive

STEP

4

Check that the CRW8824S drive is recognized correctly

Go to Control Panel System Device Manager tab. Double-click on CDROM to check that the drive is recognized correctly by the computer’s OS.

STEP Install the CD writing software

5

For details about how to install the

software, refer to the documentation

that came with it.

STEP

6

Start using the CRW8824S drive!

Use the drive to create audio CDs, to back up data on your hard disk, or for whatever purpose suits your needs.

1