Manuals / Brands / Home Audio / CD Player / Yamaha / Home Audio / CD Player

Yamaha CRW8824S, CRW8824S-NB Operation, Loading a Disc, Ejecting the Disc, 2Remove the disc from the tray, Press the Eject button to close the tray

1 51

Download 51 pages, 2.3 Mb

Operation

This section explains how to operate the CRW8824S drive after you have installed it. Make sure the computer is powered up.

Loading a Disc

1Press the Eject button on the CRW8824S drive’s front panel.2Place the disc onto the tray with its label or printing facing upward.3Press the Eject button to close the tray.

When a disc is loaded, the ON/DISC LED is lit up in orange first, then changes to green. For more details, refer to page 38.

Do not push or pull the tray using excessive force. Doing so can damage the drive or the disc. Instead, always use the Eject button to open or close the tray.

Ejecting the Disc

1Press the Eject button on the CRW8824S drive’s front panel.

2Remove the disc from the tray.

3Press the Eject button to close the tray.

Contents

Page COMPLIANCE INFORMATION STATEMENT Page Page SAFETY PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING WARNING CAUTION About CD-R/RWdiscs 2.All trademarks contained in this manual belong to their respective owners Precautions for Transportation Distributing Discs Copyrights Table of Contents Setup Flowchart Introduction Features of the CRW8824S Drive High speed CD TEXT support Wide compatibility System Configuration Computer Software Discs Tools Phillips Screwdriver Long-NosedPliers Front and Rear of Unit Front Panel Rear Panel Installation First Steps Rear Panel 1SCSI ID number 2Parity Check 3Termination 4Block Size Installing the CRW8824S Drive Fitting the CRW8824S as an Additional Drive Remove the front cover of a vacant About SCSI adapter card termination Page Page Connect a )Attach the outer casing of the computer and any screws that were removed !Reconnect the computer to the AC outlet and power it up Double-click $Install the CD writing software Replacing an Existing CD-ROMDrive with the CRW8824S Page Remove the four screws holding the Page Page Connect the !Attach the outer casing of the computer and any screws that were removed @Reconnect the computer to the AC outlet and power it up %Install the CD writing software Operation Loading a Disc Ejecting the Disc Manually Ejecting a Disc in an Emergency Troubleshooting OFF The disc tray does not come out The disc keeps being ejected The drive does not operate correctly The “Buffer Underrun” error message is displayed Appendix Writing Modes Disc-at-Once(DAO) Track-at-Once(TAO) Session-at-Once(SAO) Packet Writing About the firmware Determining the firmware version of the CRW8824S drive (in Windows 95/98/98SE) LED Indicator Messages CRW8824S Specifications Page Index EUROPE, EASTERN EUROPE and RUSSIA U.S.A CANADA AUSTRALIA TAIWAN