Installation

@After the computer’s operating system (Windows 95/98/98SE) has loaded, open the Control Panel and double-click on the System icon. Select the Device Man- ager tab and double-click on “CDROM.” If the drive has been correctly in- stalled, it should be listed as shown below. Similarly, double-click on “SCSI controllers”and the SCSI adapter card should be listed as shown below if it has been properly installed.

For more information about how to use the operating system, refer to the documentation that came with it.

If there is aor mark etc. next to the icon for the CRW8824S drive or the SCSI adapter card, this means that it has not been installed correctly.

When using Windows NT, you can verify by opening the Control Panel, double-clicking on SCSI Adapter and clicking the Devices tab.

For Windows 2000, double-click System in the Control Panel, select the Hardware tab, and click the Device Manager button in System Properties.

*This is a screen shown in the Windows 98 environment.

#Double-click “YAMAHA CRW8824S” listed under “CDROM” (in Windows 95/98/98SE) and click the Settings tab. Check the “Sync data transfer” checkbox. With “Sync data transfer” enabled, the data transfer between your CRW8824S drive and your computer is synchronized, meaning that the maximum possible data transfer rate can be achieved.

Refer to the documentation that came with your SCSI card for further details.

When using Windows NT, “Sync data transfer” will automatically be selected if the SCSI adapter card supports this feature. You will not need to change this setting.

*This is a screen shown in the Windows 98 environment.

$Install the CD writing software.

Refer to the documentation that came with the CD writing software for further details.

21