Manuals / Brands / Home Audio / CD Player / Yamaha / Home Audio / CD Player

Yamaha CRW8824S, CRW8824S-NB Fitting the CRW8824S as an Additional Drive, 1Power down your computer and unplug it from the AC outlet

1 51

Download 51 pages, 2.3 Mb

Installation

Fitting the CRW8824S as an Additional Drive

1Power down your computer and unplug it from the AC outlet.

If you proceed without doing this, you run the risk of receiving an electric shock and/or short-circuiting and damaging components including the CRW8824S drive.

2Remove the outer casing of the computer. If you need to remove screws in the process, make sure you don’t lose them.

The method for removing the casing and fitting the drive in the drive bay can vary depending on the manufacturer. Refer to the documentation that came with your computer for further details.

Contents

Page COMPLIANCE INFORMATION STATEMENT Page Page SAFETY PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING WARNING CAUTION About CD-R/RWdiscs 2.All trademarks contained in this manual belong to their respective owners Precautions for Transportation Distributing Discs Copyrights Table of Contents Setup Flowchart Introduction Features of the CRW8824S Drive High speed CD TEXT support Wide compatibility System Configuration Computer Software Discs Tools Phillips Screwdriver Long-NosedPliers Front and Rear of Unit Front Panel Rear Panel Installation First Steps Rear Panel 1SCSI ID number 2Parity Check 3Termination 4Block Size Installing the CRW8824S Drive Fitting the CRW8824S as an Additional Drive Remove the front cover of a vacant About SCSI adapter card termination Page Page Connect a )Attach the outer casing of the computer and any screws that were removed !Reconnect the computer to the AC outlet and power it up Double-click $Install the CD writing software Replacing an Existing CD-ROMDrive with the CRW8824S Page Remove the four screws holding the Page Page Connect the !Attach the outer casing of the computer and any screws that were removed @Reconnect the computer to the AC outlet and power it up %Install the CD writing software Operation Loading a Disc Ejecting the Disc Manually Ejecting a Disc in an Emergency Troubleshooting OFF The disc tray does not come out The disc keeps being ejected The drive does not operate correctly The “Buffer Underrun” error message is displayed Appendix Writing Modes Disc-at-Once(DAO) Track-at-Once(TAO) Session-at-Once(SAO) Packet Writing About the firmware Determining the firmware version of the CRW8824S drive (in Windows 95/98/98SE) LED Indicator Messages CRW8824S Specifications Page Index EUROPE, EASTERN EUROPE and RUSSIA U.S.A CANADA AUSTRALIA TAIWAN