Yamaha D24 Choosing D24 Slots, Selecting Slot Inputs

184 Chapter 17—Digital Audio I/O
D24—Owner’s Manual
Choosing D24 Slots
The D24 has four slots for installing mini YGDAI cards. Slots 1 and 2 are intended for
use with analog input cards or digital I/O cards. Since slot 1 or 2 can be selected as the
wordclock source, it’s best to use these slots when installing digital I/O cards. Slots 3 and
4 are intended for use with analog output cards.
Use the following table as a guide when choosing slots. Also listed are input assignments
for the analog cards and AES/EBU card when using Dual AES/EBU mode. See page 186
for more information on Dual AES/EBU mode.
Selecting Slot Inputs
With the configurations listed in the previous table, the D24 will automatically chose
which slot(s) to use for the track inputs. When two digital I/O cards, two analog input
cards, or a combination of digital I/O and analog input cards are installed in slots 1 and
2, you must select which slot will feed the track inputs, using the Input Select function.
1Press the [SETUP] button.
The SETUP indicator lights up.
2Use the JOG/DATA dial to select “INPUT SELECT,” and then press the [ENTER]
button.
The currently selected slot appears on the display.
3Use the JOG/DATA dial to select either “SLOT 1” or “SLOT 2.”
4Press the [ENTER] button to activate your selection, or the [CANCEL] button
to cancel the Input Select function.
5Press the [SETUP] button again to leave setup.
The SETUP indicator goes out.
Card Recommended Slot
[[
[[__ __11 11__ __]] ]] [[ [[__ __22 22__ __]] ]] [[ [[__ __33 33__ __]] ]] [[ [[__ __44 44__ __]] ]]
MY8-AD
(8 analog inputs)
Inputs 1–8
———
Dual mode:
Inputs 1–4
MY4-AD
(4 analog inputs)
Inputs 1–4 Inputs 5–8
——
Dual mode:
Inputs 1–4—
MY4-DA
(4 analog outputs) ——
Outputs 1–4 Outputs 5–8
Dual mode:
Outputs 1–4—
MY8-AT
(ADAT) Inputs 1–8
Outputs 1–8———
MY8-TD
(Tascam) Inputs 1–8
Outputs 1–8———
MY8-AE
(AES/EBU)
Inputs 1–8
Outputs 1–8
———
Dual mode:
Inputs 1–4
Outputs 1–4