54 Chapter 5—General Operation
D24—Owner’s Manual
Setting the Nudge Time
The length of the section to be auditioned is set using the Nudge Time function.
1Press the [UTILITY] button.
The UTILITY indicator lights up.
2Use the JOG/DATA dial to select “NUDGE TIME,” and then press the [ENTER]
button.
The currently set nudge time appears on the display.
3Use the JOG/DATA dial to set the nudge time to 20, 50, or 100 ms.
The default setting is 100 ms.
4Press the [ENTER] button to activate your selection, or the [CANCEL] button
to cancel the Nudge Time function.
5Press the [UTILITY] button again to leave utility.
The UTILITY indicator goes out.