![](/images/new-backgrounds/1276226/276226173x1.webp)
|
| r |
|
|
| e e |
| ||
f |
| n | ||
e |
|
|
| c |
R |
|
|
| e |
|
|
|
|
The Functions
The “Functions” provide access to a range of detailed instrument parameters for tun-
ing, setting the split point, and adjusting the voices and effects. Take a look at the func-
tion list starting on the opposite page. There are 46 function parameters in all.
When you locate a function you want to set up, simply select the function’s display name (shown to the right of the function name in the list) and adjust as required.
Selecting and Setting Functions
1 Find the function you want to set in the list that begins on page 88.
2 Press the [FUNCTION] button.
3 Select a function.
Press the CATEGORY [f ] and [r ] buttons as many times as necessary until the function’s display name appears in the display.
Function category | Previous item | Next item | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The selected function
Value
4 Use the dial, the [+] and
The [+] and
In some cases the [+] button will initiate execu- tion of the selected function, and the
Direct numeric entry.
• Decrement value by 1. | • Increment value by 1. |
• OFF | • ON |
• Cancel | • Execute |
Press simultaneously to |
|
recall the default setting. |
|
Function settings are stored in memory as soon as they are changed. To restore all initial factor default settings perform the “Backup Clear” procedure described in the “Initialization” sec- tion on page 61.