50

◆ Memory lock
The lock function protects information in a memory not to be overwritten. You can set the lock function for each memory number, and
additionally for each SDTV/HDTV/RGB-PC input.

<Setting Memory Lock>

1. Recall the memory number you
wish to lock.
2. Select a memory number status.
3. Press the button.
“” appears beside locked memory
numbers.
Remote Control Main Unitor
abc d e
Memory 1 VIDEO
0
0
0
100
WRGB
Image Signal Initial Setup
Move Menu Window
Black Level
White Level
Gamma Trim
Hue
Saturation
Level Adjustment
Iris
Color Adjustment
White Peaking 0
6500K +0.000uv
-
2
Sharpness Gain
Sharpness Type
2
1. Select the memory number youwish to unlock.2. Select a memory number status.3. Press the button.“” disappears from the memory statusscreen and the memory lock is removedfrom the memory number you selected.Remote Control Main Unitor
abc d e
Memory 1 VIDEO
0
0
0
100
WRGB
+ : Enter
Image Signal Initial Setup
Move Menu Window
Black Level
White Level
Gamma Trim
Hue
Saturation
Level Adjustment
Iris
Color Adjustment
White Peaking 0
6500K +0.000uv
-
2
Sharpness Gain
Sharpness Type
2

<Deactivating Memory Lock>

Memo
•You can change settings when the memory is locked, but the unit does not save the changes to a memory. Any changes you makeare erased when you place this unit to standby mode. (The memory number status color changes from white to gray if you changeany menu items while the memory is locked.)“ ”disappears“ ”appears15_DPX-1300-E.p65 9/22/05, 6:19 PM50