Projection distance
The most suitable distance between the screen and the projector (see Projection distance [a]) depends on the size of the screen (diagonal length) you use. You can use the zoom function to adjust the projection distance within a preset range from Wide to Tele. You can also alter the V.POS parameter to adjust the vertical position of the image to better suit the screen. Use the information in the table below to determine the best location to place the projector in to suit your screen size.
<When using a 16:9 screen>
Screen size | Projection distance [a] |
(inch) | Wide (m) – Tele (m) |
|
|
60 | 1.78 – 2.88 |
70 | 2.08 – 3.37 |
80 | 2.39 – 3.86 |
90 | 2.70 – 4.35 |
100 | 3.00 – 4.84 |
110 | 3.31 – 5.33 |
120 | 3.62 – 5.82 |
150 | 4.54 – 7.29 |
200 | 6.07 – 9.74 |
|
|
Projection distance [a]
| Lens |
|
60'' 80'' | 100'' centerline 150'' | 200'' Screen size |
6
Installation
* These are theoretical values.
During actual use there may be a deviance of a few percent.
<When using a 4:3 screen>
Since the
Screen size | Projection distance[a] | ||||
|
|
|
|
| |
16:9 image (*1) |
| 4:3 image (*2) | |||
(inch) |
| ||||
Wide (m) – Tele (m) |
| Wide (m) – Tele (m) | |||
|
| ||||
|
|
|
|
|
|
60 | 1.63 – 2.64 |
| 2.17 – 3.52 | ||
80 | 2.19 – 3.54 |
| 2.93 – 4.72 | ||
100 | 2.76 – 4.44 |
| 3.68 – 5.92 | ||
120 | 3.32 – 5.34 |
| 4.43 – 7.12 | ||
200 | 5.58 – 8.94 |
| 7.43 – 11.92 | ||
|
| (*3) |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
(*1) Projects a 16:9 image that completely fills the screen (leaves a black line at the top and bottom of the screen).
(*2) Projects a 4:3 image that completely fills the screen.
(*3) When projecting both 16:9 and 4:3 images.
You can use the zoom function to make efficient use of the screen for both *1 and *2 above. The projection distance in this case is between Wide in *2 and Tele in *1. Use the zoom to adjust the size of the projection images so that they fill the screen completely. Note that adjustments to V.POS may cause the position of the image to change.
English
13
