18
On-screen menu
Surround Size
Specifies the surround speaker size.
Choices: Large, Small, Off
Initial setting: Large
Subwoofer
If you wish to use a subwoofer, select [On]. Otherwise
select [Off].
Choices: On, Off
Initial setting: On
Note:
– You may not be able to make settings that match your
speaker layout.
DVD/CD Mode
Adjusts the volume of each speaker for audio playback
(excluding SA-CDs). If you adjust the volume level for
any speaker, the volume level for the other speakers is
adjusted accordingly.
Front R Vol
Choices: –6 to +6
Initial setting: 0
Front L Vol
Choices: –6 to +6
Initial setting: 0
Centre Vol
Choices: –6 to +6
Initial setting: 0
Surround R Vol
Choices: –6 to +6
Initial setting: 0
Surround L Vol
Choices: –6 to +6
Initial setting: 0
Subwoofer Vol
Choices: –6 to +6
Initial setting: 0
SA-CD Mode
You can adjust the volume level output from each
channel for SA-CD playback.
You must choose Multi-channel for Analog output to
make this function available. (See “Analog output” on
page16.)
If you adjust the volume level for any speaker, the
volume level for the other speakers is adjusted
accordingly.
Cut-off frequency
Cut off frequency adjustment for a subwoofer.
Choices: 60, 80, 100, 120 (Hz)
Initial setting: 120 (Hz)
Slope
Filter slope adjustment for a subwoofer.
Choices: 12, 18, 24 (dB/oct)
Initial setting: 12 (dB/oct)
Front R Vol
Choices: –6 to +6
Initial setting: 0
Front L Vol
Choices: –6 to +6
Initial setting: 0
Centre Vol
Choices: –6 to +6
Initial setting: 0
Surround R Vol
Choices: –6 to +6
Initial setting: 0
Surround L Vol
Choices: –6 to +6
Initial setting: 0
Subwoofer Vol
Choices: –6 to +6
Initial setting: 0
i.LINK
You only need to make this setting if you connected this
player to an i.LINK-compatible component. Connected
components must be DTCP (Digital Transmission
Content Protection)-compliant in order to play DVD
audio and Super Audio CD signals received via i.LINK.
Notes:
– This unit supports i.LINK (AUDIO), allowing you to
transfer audio signal information to other
components compatible with i.LINK (AUDIO).
However, because this unit does not support
i.LINK(VIDEO), you cannot transfer video
information to other components.
– Do not disconnect i.LINK cables or switch off any
components connected using i.LINK while this player
is turned on.
– Copy-protected 96 kHz DVD-Video discs are
downsampled to 48 kHz when using an i.LINK
connection.
– You can connect up to 16 i.LINK components to this
unit.
Audio Output
Change this setting to [Off] if an i.LINK-compatible
component is still connected but you do not want to output
signals using i.LINK. Reset to [On] to use the i.LINK interface.
Choices: On, Off
Initial setting: On
Note:
–
When audio data is transferred via an i.LINK connection,
analog, digital and HDMI audio signals are muted.